MULTIQUIP MTR40F Bedienungsanleitung PDF herunterladen (Seite 12)

PAGE 12 — MTR40F RAMMER — OPERATION AND PARTS MANUAL — REV. #3 (01/05/12)

Figure 1 shows the location of the controls and components

for the MTR40F Tamping Rammer. The functions of each

control is described below:

1. Throttle Lever — Used to adjust engine speed (rpm).

Move lever forward

(SLOW)

to reduce engine speed,

move lever back toward operator

(FAST)

to increase

speed.

2. Fuel Shut-Off Valve — Supplies fuel from the fuel tank

to the engine. To begin fuel flow move the fuel shut-off

valve downward.

3. Primary Air Cleaner — Pre-cleans (first stage) dirt and

other debris from entering the engine.

4. Foot — Laminated wood with tempered steel plate for

superior shock absorption.

5. Grip — When transporting the rammer, carry it by griping

the handle.

6. Nameplate — Displays information regarding the rammer.

7. Handle — To operate rammer

GRIP

handle assembly

firmly on both sides.

Figure 1. MTR40F Rammer

8. Fuel Tank/Cap — Remove this cap to add unleaded

gasoline to the fuel tank. Make sure cap is tightened securely.

DO NOT over fill.

9. Engine Air Cleaner — Prevents dirt (second stage) and

other debris from entering the engine.

10. Dust Sleeve — Prevents dust and debris from entering

into the spring cylinder.

11. Zerk Fittings — Lubricates main springs and crankcase

bearings.

COMPONENTS

WARNING

Add fuel to the tank only when the engine is

stopped and has cooled down. In the event

of a fuel spill, DO NOT attempt to start the

engine until the fuel residue has been

completely wiped up and the area

surrounding the engine is dry.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

MULTIQUIP MTR40F Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor MULTIQUIP MTR40F