MULTIQUIP MVH-200DA Spezifikationen PDF herunterladen (Seite 17)

MVH-200DA PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (03/21/05) — PAGE 17

Starting the Engine (Yanmar engine):

1. Open the fuel cock

(Figure 7).

2. Move the throttle lever to the START position by opening it

to about 20 degrees (Figure 8).

Figure 8. Throttle Lever (Start Position)

3. Grasp the starter grip (Figure 9) and slowly pull it out. The

resistance becomes the hardest at a certain position, corre-

sponding to the compression point. Pull the starter grip briskly

and smoothly for starting.

4. Push down the decompression lever (Figure 10) and re-

lease.

This section is intended to assist the operator with the

initial

start-up

of the compactor. It is extremely important that this

section be read carefully before attempting to use the compactor

in the field.

MVH-200DA — START-UP PROCEDURE

Figure 9. Starter Grip

Figure 10. Decompression Lever

Figure 7. Fuel Cock

Shut-Down Procedure:

1. Return the throttle lever to the START position. Allow the

machine to cool down for 2 to 3 minutes.

2. Turn the

throttle lever

to the STOP position (Figure 11) to

stop the engine.

3. Close the fuel cock (Figure 7).

Figure 11. Throttle Lever (Stop)

5. If the engine does not start, repeat steps 3 and 4.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Keine Kommentare

MULTIQUIP MVH-200DA Spezifikationen Seite 17